Silicone Whale mold - Candle vessel concrete mold

Whale Candle Molds

FINISHED PRODUCT SIZE:

Length: 16 cm (6.3")
Height: 7 cm (2.8")
Width: 8 cm (3.1")

50 ml of wax inside

We offer you a high-quality handmade silicone mold of European production (not China), made from premium silicone using vacuum equipment. It is easy to demold yet resistant to deformation.

We put a piece of our soul into every mold!

🌈 The color of the molds may vary, but this will not affect the quality of the final product.

❗️Depending on the type of mold, there may be cuts to allow for easy removal of the finished product. Please understand this is not a defect but a necessity. Due to specific geometry, some molds do not require cuts. Without these cuts, you will not be able to remove the finished product.

To use the mold correctly, please follow these steps:

1. Place the mold on a flat, horizontal surface.
2. Secure the joint with a rubber band or tape.
3. Ensure all the cutting joints are in place. It is important to apply the correct locking pressure (not too weak or too strong).
4. If the finished product has seams, they should be polished.
5. If these simple rules are not followed, good results when using the mold cannot be guaranteed.

To demold your product:

1. Place the mold in the refrigerator; this will speed up the cooling process, help the wax set, and separate it from the mold. Flip the mold every 30 minutes to ensure even cooling.
2. Carefully try to remove the candle; do not pull too hard.
3. Don’t be afraid to stretch the silicone (we use soft silicone, so it can be stretched) – it will not tear.

📦 Standard delivery time is 10-25 days.

If you have any questions, please feel free to contact us, and we will respond very quickly!